Page 1 of 1
Hopefully some pics now i've worked out how to do it
Posted: Mon Jul 23, 2007 11:19 pm
Author: jam
Here's some pics of the MadCow, 1075 Wiseco, Yoshi cams, DynaS, Flowed head by Dom Tricket, 38mm RS flatslides, V&H headers with cutdown Scorpion can.Hydraulic clutch conversion using GSXR1100 parts. GSXR slingshot running gear, about to be swapped for newer GSXR K5 radial braked front and JMC braced arm with drag slots. I may swap the Z1R tank for a Z900 one but keep the ZedButt 650 seat unit and ditch the clipons in favour of some drag bars. Third pic is of my ZRX650 full spec in last months Streetfighters mag.

http://iphotobucket.com/albums/z80/jamm21/DSCF0079[img]http://i188.photobucket.com/albums/z80/jamm21/DSCF0078
Hopefully it should have worked( fingers crossed)[/img]
I still can't suss it out, I've done the photobucket thing and got them there, but I can't seem to get them here for some reason, damn computers I hate the bleedin things
Posted: Tue Jul 24, 2007 7:22 am
Author: MaineKZ
Hi Jam
You may be making the same mistakes I always make:
1. The image reference in your photobucket album you want to copy and paste to your posting is the SECOND reference number, not the top one.
2. Make sure you click the [img] button in your posting menu, then move the cursor to the end of that [img] in your text. Next paste your ref. number copied for P/B album then click [img] in the posting menu again.
Basically, for each picture you wanna post, you should be creating an [img] 'sandwich', with no spaces within each sandwich.
Christ - who'd be in I.T. ???
Tell you what, let's try this............

Posted: Tue Jul 24, 2007 7:27 am
Author: TheBogieMan
if you just copy whats in the box with BBcode or whatever it is (can't access photobucket at work) that should have all the [ img ] bits in it so you dont need to click on the Img button at the top of the posting box.
Posted: Tue Jul 24, 2007 5:41 pm
Author: Pigford
Jam, thats my kind of bike mate, proper DIY & well cool

Posted: Tue Jul 24, 2007 7:35 pm
Author: z1bnackerkwacker
Pigford wrote:Jam, thats my kind of bike mate, proper DIY & well cool

Now, where've I seen that bike b4

Posted: Tue Jul 24, 2007 8:08 pm
Author: QuickNick
Well I'm not local so must of been in a mag, Streetfighters?
Posted: Tue Jul 24, 2007 8:15 pm
Author: z1bnackerkwacker
QuickNick wrote:Well I'm not local so must of been in a mag, Streetfighters?
Poss', seen cow paint in something, can't remember what or when....

Posted: Tue Jul 24, 2007 8:18 pm
Author: QuickNick
Can you remember the bird spread over it then!
Posted: Tue Jul 24, 2007 9:05 pm
Author: z1bnackerkwacker
QuickNick wrote:Can you remember the bird spread over it then!
Nope, just Cow paint....

Posted: Wed Jul 25, 2007 8:16 am
Author: Ed Z1-R
Pukka

Posted: Sat Aug 18, 2007 5:45 pm
Author: jam
It was featured in streetfighters in 2001, I bought it off a mate in 02 who got it from big4, I've since rebuilt the motor, rewired it all, and sorted out some other niggles. I'm about to fit a GSXR1000K4 USD radial brake front end a braced and slotted JMC rear with GSXR750K4 rear wheel, and change a few other bits around, I may go bigger on the motor if I can get hold of a set of GPZ1100 barrels, and go to 1170ish.I've been too busy to come on for a week or so as I was running my mobile dyno at the Bulldog, and I'm now trying to get my ZRX650 rebuilt for the Exeter show next week and finish my GSXR750K5 fighter in time for the show too. I'll be at Exeter with the dyno truck if anyone's going, so hopefully see some of you there on the 25th/26th of August.
Posted: Sat Aug 18, 2007 6:26 pm
Author: Pigford
If it ain't raining I'll be there matey

Posted: Sun Aug 19, 2007 12:22 pm
Author: jam
Listen out for the sound of tortured sportsbikes and that's where I'll be
