I did a thread on my Z1-B project back in 2010 but it got trashed in the great meltdown.Very briefly I got a bike like this from Rick Brett -

Sprinkled some elbow grease and fairy dust on it for 12 months or so and it turned into this -

Then it got a bit bogged down in a big debate over paint sets, which supplier, which painter, which colour etc. After viewing loads of pictures and taking advice on here I chose Jeff Saunders from Z1 Enterprises to supply a Candy Super Red PMC paint set as recommended by GEZ635.
Here's what came -

Superb safe packaging thanks Jeff - which eventually revealed these little beauties -

I have fiddled with a couple of other things this season - new CHOKE lever and Carb Idle Screw, Genuine Petcock, Yuasa battery, non-vibrating factory mirrors (that's a relief - thought I was getting the shakes

...and an upgrade - or is it a downgrade? back to a genuine STANLEY sealed beam unit.
So she has ended up looking a bit like this for Autumn 2012 -

A few lads on here were discussing the merits of PMC paint sets on here recently so thought this might be of some interest - especially as the supplier is a member.
Loads more detail & pics on my rebuild website here if anyone wants to look -
http://www.zedrider.co.uk/z1-b.html
I have stuck a few fitting tips that I picked up on there as well. One good one is blank or mask off the filler hole when you are fiddling with the tank catch spring. It will save you hours of fishing around in your tank with a magnet


Cheers from Mark