Pigford wrote:Dymags
Modern style 17" - 120/70 front tyre & 190/55 rear
won't fit a std swinging arm - which I still have to get down from the loft and photograph!
750mm fork length is correct.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Harris Magnum 1
Moderators: KeithZ1R, chrisu, paul doran, Taffus
KWACKERZ1 - Great info my man - excellent help 
The ZZR1100 forks I have are mint, (& 43 x 750mm) and I shall look out for a ZRX top yoke, thanx !!!!
The 17" wheel will do me fine - not gonna do any Classic Racing ......
RICH - I was wondering about that
May have to use a GSXR s/arm then. The frame gap is about 240mm
The ZZR1100 forks I have are mint, (& 43 x 750mm) and I shall look out for a ZRX top yoke, thanx !!!!
The 17" wheel will do me fine - not gonna do any Classic Racing ......
RICH - I was wondering about that
May have to use a GSXR s/arm then. The frame gap is about 240mm
And on the 7th day... Zeds were created!
STUFF
Piggy, this is not a hijack for my build but these may help you.
My frame has zrx forks harris adjustable yokes.
17 wheels, white power and a jmc with a 17" wheel.
[img][img]http://i223.photobucket.com/albums/dd291/kwackerz1/harrisaug20111.jpg[/img]
[/img]
[img][img]http://i223.photobucket.com/albums/dd291/kwackerz1/harrisaug20116.jpg[/img]
[/img]
[img][img]http://i223.photobucket.com/albums/dd291/kwackerz1/harrisaug20113.jpg[/img]
[/img]
(The wheels I got Second hand from a Z750 TWIN WITH A SIDECAR!
)
My frame has zrx forks harris adjustable yokes.
17 wheels, white power and a jmc with a 17" wheel.
[img][img]http://i223.photobucket.com/albums/dd291/kwackerz1/harrisaug20111.jpg[/img]
[/img]
[img][img]http://i223.photobucket.com/albums/dd291/kwackerz1/harrisaug20116.jpg[/img]
[/img]
[img][img]http://i223.photobucket.com/albums/dd291/kwackerz1/harrisaug20113.jpg[/img]
[/img]
(The wheels I got Second hand from a Z750 TWIN WITH A SIDECAR!
)
Last edited by KWACKERZ1 on Fri Nov 04, 2011 11:24 am, edited 2 times in total.
Swingarm
THX Padders.
Mark the other info you wanted and to save Rich a trip in the loft is here.
(bear in mind these are tape measure measurements so may vary 1-2mm)
Rear spindle gap 220-223mm
[img][img]http://i223.photobucket.com/albums/dd291/kwackerz1/photos0411168.jpg[/img]
Swing arm pivot 240-244mm.
[/img]
Length 500 mm (swing arm spindle center to wheel spindle center with eccentric in forward position 430mm)
[img][img]http://i223.photobucket.com/albums/dd291/kwackerz1/photos0411166.jpg[/img]
Rear shock length 300mm 60mm travel and 270mm between eyes[/img]
Anything else you need give me a shout !
Mark the other info you wanted and to save Rich a trip in the loft is here.
(bear in mind these are tape measure measurements so may vary 1-2mm)
Rear spindle gap 220-223mm
[img][img]http://i223.photobucket.com/albums/dd291/kwackerz1/photos0411168.jpg[/img]
Swing arm pivot 240-244mm.
[/img]
Length 500 mm (swing arm spindle center to wheel spindle center with eccentric in forward position 430mm)
[img][img]http://i223.photobucket.com/albums/dd291/kwackerz1/photos0411166.jpg[/img]
Rear shock length 300mm 60mm travel and 270mm between eyes[/img]
Anything else you need give me a shout !
Magnum
Piggy,
No problem, by the way the shock in mine is a zane 750 laverda mid 80's shock from some laverda breakers in mid wales (cant remember the name) and its a white power. So it could be worth looking for one if you need a shock. (get a white power though not the paoli.)
Can you do me a favour and Change your project thread title to Magnum 1 to be accurate. Not that I am an anorak or anything!!!
No problem, by the way the shock in mine is a zane 750 laverda mid 80's shock from some laverda breakers in mid wales (cant remember the name) and its a white power. So it could be worth looking for one if you need a shock. (get a white power though not the paoli.)
Can you do me a favour and Change your project thread title to Magnum 1 to be accurate. Not that I am an anorak or anything!!!
This arrived from a very very nice chap on OSS - from France
...........but - my options are multiplying daily as I have just done a deal on annuver s/arm..... tbc
...........but - my options are multiplying daily as I have just done a deal on annuver s/arm..... tbc
Last edited by Pigford on Wed Nov 09, 2011 5:53 pm, edited 1 time in total.
And on the 7th day... Zeds were created!
-
Ginger Bear
- Hardcore
- Posts: 6850
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
Piggy........ There's nothing like having a 'plan'.
Sometime's it's good to just sit back & see where it takes you..
Anyhow matey, I'm enjoying this thread a lot.
Feel free to ask when you need spacers etc making..........
............... It'll be good to eat your biscuits.
Sometime's it's good to just sit back & see where it takes you..
Anyhow matey, I'm enjoying this thread a lot.
Feel free to ask when you need spacers etc making..........
............... It'll be good to eat your biscuits.
# 104
Phil Churchett Award Winner 2011 & 2016
Buzzworkz Best Modified Zed 2016
Who is online
Users browsing this forum: Google [Bot] and 11 guests