Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Zed 900 road racer .

Work in Progress

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
zed1015
Hardcore
Hardcore
Posts: 2319
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

#241 PostAuthor: zed1015 » Fri May 24, 2013 9:02 pm

On to the downpipes tonight.
Bends out of the head are matched to the ports at 35mm and the bottom bends to the collector are 38mm so time to knock up some tapered headers

A simple notch to the required length was closed up with some hose clips then tacked in place before removing the clips and welded in full
Image

Middle pipes slotted on and lower bends offered up
Image

A bit of adjustment and they are ready for welding.
Some alloy angle held on with hose clips keeps every thing tight and in line and leaves enough of a gap so i can get a couple of tack welds on.
Image

Image
Top
Keefleaf
Hardcore
Hardcore
Posts: 1669
Joined: 24th May 2007
Location: Isle of Wight

#242 PostAuthor: Keefleaf » Sat May 25, 2013 1:17 pm

Your making a lot of people Lime Green with envy :lol:

Re;carbs. Will you be using the smoothbores slides as made by Z1 Enterprises?
Top
User avatar
zed1015
Hardcore
Hardcore
Posts: 2319
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

#243 PostAuthor: zed1015 » Sat May 25, 2013 8:37 pm

Keefleaf wrote:Your making a lot of people Lime Green with envy :lol:

Re;carbs. Will you be using the smoothbores slides as made by Z1 Enterprises?


Haven't seen those but will be using the slides i have anyhow as they will work as good as any.
Top
User avatar
zed1015
Hardcore
Hardcore
Posts: 2319
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

#244 PostAuthor: zed1015 » Sat May 25, 2013 9:21 pm

Got the mid pipes welded this morning and then tackled the outers
Image

These are a bit trickier as they have to snake round the mid pipes and still end up the same length as the others at the collecter.
Image

After lots of adjustment it misses everything so gets a visit from mister welding torch after which i have to make a mirror image for the other side
Image

Time flies when you're having fun and todays 10 hours in the shed gets me this :D
Image

Managed to get all the pipes the same length give or take a millimeter.
Image



Image

Just need to make some spring tags to pull it all together and then on the the link pipe and silencer.
Top
Keefleaf
Hardcore
Hardcore
Posts: 1669
Joined: 24th May 2007
Location: Isle of Wight

#245 PostAuthor: Keefleaf » Sat May 25, 2013 11:26 pm

:D KILLER :D
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#246 PostAuthor: Pigford » Sun May 26, 2013 7:07 am

You is some sort of genius Rob :wink:
And on the 7th day... Zeds were created!
Top
Royalratch
100Club
100Club
Posts: 366
Joined: 3rd Jul 2009
Location: London

#247 PostAuthor: Royalratch » Sun May 26, 2013 8:33 am

Seriously bad-ass Rob.
Top
User avatar
PJ
Hardcore
Hardcore
Posts: 3538
Joined: 2nd Dec 2008
Location: Halesowen, West Mids

#248 PostAuthor: PJ » Sun May 26, 2013 8:45 am

Brilliant
WHO NEEDS DRUGS - WHEN YOU HAVE A ZED!!
Top
User avatar
z1bnackerkwacker
Custard Cream
Custard Cream
Posts: 690
Joined: 20th May 2006
Location: Swansea

#249 PostAuthor: z1bnackerkwacker » Sun May 26, 2013 9:46 am

Almost think it's perfect.
Gonna throw a spanner in works now.
Don't like the rear lower of frame where it's been chopped.
Maybe it'll be hidden by exhaust ?.....
:roll:
Top
User avatar
zed1015
Hardcore
Hardcore
Posts: 2319
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

#250 PostAuthor: zed1015 » Thu May 30, 2013 3:24 pm

Spring tags and springs on

Image

Mid pipe done
Image

And the beginings of a silencer
Image
Top
garyd
Hardcore
Hardcore
Posts: 2558
Joined: 11th Jun 2011
Location: West of London

#251 PostAuthor: garyd » Thu May 30, 2013 6:20 pm

Leave the pipe like that...start a new trend :D
Top
Is Vic There
Hardcore
Hardcore
Posts: 1460
Joined: 8th Nov 2011
Location: Brisbane, Australia.

#252 PostAuthor: Is Vic There » Fri May 31, 2013 12:32 am

Your getting close to hero status :D
Z1000R ELR, Z1100R ELR, GPz900R A1, GPz750 Turbo, Norton F1, Harris Mag 2, Harris Mag 5, Yamaha YZR750SP, Triumph Steve McQueen, Suzuki RGV250 Sheene Rep, Suzuki RG500 Walter Wolf, Suzuki RG250 Walter Wolf, Aprilia RS250, Yamaha YL1, RG500. H**** NS400.
Top
User avatar
zed1015
Hardcore
Hardcore
Posts: 2319
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

#253 PostAuthor: zed1015 » Fri May 31, 2013 9:28 am

Is Vic There wrote:Your getting close to hero status :D


Better start wearing my undies outside of my pants then :lol:
Top
garyd
Hardcore
Hardcore
Posts: 2558
Joined: 11th Jun 2011
Location: West of London

#254 PostAuthor: garyd » Fri May 31, 2013 10:37 am

zed1015 wrote:
Is Vic There wrote:Your getting close to hero status :D


Better start wearing my undies outside of my pants then :lol:


Don't forget to wash them first :git
Top
User avatar
Mr Puffin
100Club
100Club
Posts: 284
Joined: 15th Jun 2011
Location: Norway
Contact:
Contact Mr Puffin

#255 PostAuthor: Mr Puffin » Fri May 31, 2013 12:38 pm

Awesome Zed :twisted:
Top
Post Reply

Return to “Projects”

Who is online

Users browsing this forum: No registered users and 11 guests