
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000 A1 project
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Still got some bits to do on it, the clocks are off for refurb by Chris Rivett, they should be back sometime in January, got something different planned for them.
I've got a new PMC Z1 custom seat & new headlamp brackets coming from Z-power & i thought i would get a full set of braided clutch, brake, tacho, speedo & throttle cables for it.
Guyzed has just swaped some engine covers with me, so here's the pics of them fitted


I've got a new PMC Z1 custom seat & new headlamp brackets coming from Z-power & i thought i would get a full set of braided clutch, brake, tacho, speedo & throttle cables for it.
Guyzed has just swaped some engine covers with me, so here's the pics of them fitted

Not mad just kwakers
Z900A4 x2, Z1000A1 x2, z1000A2, z1r, z1a project & a load of bits
Z900A4 x2, Z1000A1 x2, z1000A2, z1r, z1a project & a load of bits
cost of the paint for tank & panel set is about £325, obviously if you get your wheels done then it goes up a chunk, they also did the frame & a bucket full of bits, all in all i supose it was quite expensive & you can pay a lot less for powder coating
but......they do such a good job & it all gets rubbed down & it's got all these sparkley green bits in it & it looks soooo good that they've already got the tank & panels for the next project that i'll be starting once i've got this one on the road.....and i'm gunna be broke for the rest of my life....and who cares coz at least my bikes will look nice.
was i rambling just then

but......they do such a good job & it all gets rubbed down & it's got all these sparkley green bits in it & it looks soooo good that they've already got the tank & panels for the next project that i'll be starting once i've got this one on the road.....and i'm gunna be broke for the rest of my life....and who cares coz at least my bikes will look nice.
was i rambling just then

Not mad just kwakers
Z900A4 x2, Z1000A1 x2, z1000A2, z1r, z1a project & a load of bits
Z900A4 x2, Z1000A1 x2, z1000A2, z1r, z1a project & a load of bits
- london calling
- Hardcore
- Posts: 3992
- Joined: 16th Apr 2004
- Location: Loughborough, East Midlands
- paul doran
- Area Rep.
- Posts: 15910
- Joined: 24th Sep 2004
- Location: near Dublin Ireland
Who is online
Users browsing this forum: No registered users and 8 guests