Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

SR650 Done.... Now for the Custom 900/1100 !!

Work in Progress

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
loonix
Posts: 6
Joined: 27th Oct 2013
Location: Bristol

SR650 Done.... Now for the Custom 900/1100 !!

#1 PostAuthor: loonix » Sat May 24, 2014 2:41 pm

SR650 stripped for 3 yrs... had to get the old finger out !
Now all back together....
Everything Powder coat able powder coated
new paint work,every nut and bolt and spring re zinc plated
just a couple of little bits to finish but its not looking too bad.

Always enjoy a blat out on the baby Z

Image


Image



Image


Now the Z1.1 (Z1B 1974 with Gpz1100 a3 engine) is on her way back together with a few modifications
Mainly rectifying some bad build decisions made by original builder.....

Got some nice Baby Face rear sets.... a lovely PMC hand bent s/s Exhaust
new wiring complete....mods to the forks,rear shocks,swing arm,New clocks and mod to the top yoke to make them fit.

the list goes on !!

Lord only knows what the original builder was thinking about some of the things i had to put right.......

I'll be back with a bit of an update of things that needed to be done with pics.... and process of the build take 2

some pics here of when i bought the bike, looks cool.... till you get a bit closer :/.

Image

Image

Image
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#2 PostAuthor: Pigford » Sun May 25, 2014 1:08 pm

Nice rides lad :twisted:
And on the 7th day... Zeds were created!
Top
User avatar
coldsummer
Hardcore
Hardcore
Posts: 3211
Joined: 29th Jun 2009
Location: Berkeley

#3 PostAuthor: coldsummer » Sun May 25, 2014 2:08 pm

Both look good. I'm hopefully close to finishing my SR as well, not too many around.
Top
User avatar
loonix
Posts: 6
Joined: 27th Oct 2013
Location: Bristol

#4 PostAuthor: loonix » Sun May 25, 2014 2:32 pm

The SR is sweet, well chuffed that I got it back together... a lot of work but its just a sweet cruise, one that will stay standard I think.

The custom z1 though on the other hand is a different kettle of fish
I was , I think all to excited to get it back home when I went to buy it that I didnt look as closely as I should of at the time.

lots and lots of short cuts made in the original build from brackets made from off cuts of ali to mount the clocks (awful)...
Wiring that would make ya hair stand on end (dangerous)
It just had to come apart and redo a lot of silly silly build errors

One thing , the side stand hit the ground when deployed....the bike was not high enough !
So extend the forks, and as for the rear end you would need to see it to belive it.

I will take some pics of the bad stuff and my attempt to rectify them and post
Very soon
Top
User avatar
ollie
Custard Cream
Custard Cream
Posts: 836
Joined: 13th Sep 2002
Location: north yorkshire

#5 PostAuthor: ollie » Mon May 26, 2014 4:12 am

my mate went to look at that z1 hybrid and walked away ,the guy who was selling it said it was a built with great skill .......not sure in what my mate mumbled ,but i'm sure you will do a great job ,keep the pics coming :wink: :wink:
zedsrus:"i don't know man ,i just got here myself !!"
Top
sanderz
Custard Cream
Custard Cream
Posts: 967
Joined: 2nd Mar 2010
Location: Manchester

#6 PostAuthor: sanderz » Mon May 26, 2014 10:46 am

You've done a great job their on the SR :up

The Z1 /GPZ looks to have some very very nice parts on it already and your adding some quality parts to them - it'll be a cracking bike when its put together 'properly'. Keep us posted on progress :pop
Wots up DOHC
Top
User avatar
loonix
Posts: 6
Joined: 27th Oct 2013
Location: Bristol

#7 PostAuthor: loonix » Mon May 26, 2014 11:01 am

sanderz wrote:You've done a great job their on the SR :up

The Z1 /GPZ looks to have some very very nice parts on it already and your adding some quality parts to them - it'll be a cracking bike when its put together 'properly'. Keep us posted on progress :pop




Thx sanderz,

Just a couple of things to finish... going to get the seat recovered and new strap ,also the bars are slightly blemished .

The pics of the z1/Gpz are VERY deceptive ! some of the mods are even laughable, the builder was obviously in a rush.

doing some work on that today .... pics coming.
Top
User avatar
loonix
Posts: 6
Joined: 27th Oct 2013
Location: Bristol

#8 PostAuthor: loonix » Mon May 26, 2014 11:03 am

ollie wrote:my mate went to look at that z1 hybrid and walked away ,the guy who was selling it said it was a built with great skill .......not sure in what my mate mumbled ,but i'm sure you will do a great job ,keep the pics coming :wink: :wink:



The mumble was Prob, a Cough disguised as "bullshit" !
It wasn't a bad price i got it down to ,so on the trailer it went :)

Project On !!
Top
gpjes
Regular Poster
Posts: 99
Joined: 13th May 2013
Location: Bingley West Yorkshire

#9 PostAuthor: gpjes » Mon May 26, 2014 4:06 pm

loonix wrote:
ollie wrote:my mate went to look at that z1 hybrid and walked away ,the guy who was selling it said it was a built with great skill .......not sure in what my mate mumbled ,but i'm sure you will do a great job ,keep the pics coming :wink: :wink:



The mumble was Prob, a Cough disguised as "bullshit" !
It wasn't a bad price i got it down to ,so on the trailer it went :) so the quote was if I remember correctly was, blows classics into the weeds! I too saw it on ebubbles the only thing I saw diifferent was the oversize harleybars setup but then you' got've got good basics to start from to, turn a reight toy art lad. Kinda like the GPZ900 on the Raven Comment on here, the green one shows what can be done, awesome hope yours turns out the same


Project On !!
:D :D Jes
More Smiles Per Mile
Top
Post Reply

Return to “Projects”

Who is online

Users browsing this forum: No registered users and 9 guests