Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

trick z1000

Work in Progress

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Message
Author
User avatar
KWACKERZ1
Hardcore
Hardcore
Posts: 1729
Joined: 1st Sep 2007
Location: Leicestershire

rearsets

#481 PostAuthor: KWACKERZ1 » Tue Nov 17, 2009 9:55 am

Rearsets look like Tarozzi ones ?

User avatar
mikey
Hardcore
Hardcore
Posts: 3792
Joined: 29th Nov 2005
Location: bristol

#482 PostAuthor: mikey » Tue Nov 17, 2009 5:07 pm

Ive had them rearsets in my hot little puddies i know what they are,
and they are.............................Let brian tell you :lol:
Making the world a shiny place with a factory finish

brian 450
Custard Cream
Custard Cream
Posts: 670
Joined: 2nd Sep 2008
Location: East Sussex

#483 PostAuthor: brian 450 » Tue Nov 17, 2009 5:38 pm

They are Tarrozi rearsets, and fireblade rear pegs.

brian 450
Custard Cream
Custard Cream
Posts: 670
Joined: 2nd Sep 2008
Location: East Sussex

#484 PostAuthor: brian 450 » Wed Nov 18, 2009 7:39 pm

FITTED BLANK OFF'S FOR REAR PEGS

brian 450
Custard Cream
Custard Cream
Posts: 670
Joined: 2nd Sep 2008
Location: East Sussex

#485 PostAuthor: brian 450 » Wed Nov 18, 2009 7:40 pm

Image

brian 450
Custard Cream
Custard Cream
Posts: 670
Joined: 2nd Sep 2008
Location: East Sussex

#486 PostAuthor: brian 450 » Wed Nov 18, 2009 7:47 pm

ALSO FITTED OIL COOLER. IT WILL HAVE PROPPER BOLTS WHEN FITTED PROPERLY AFTER IT HAS BEEN POLISHED!!! I AM GETTING EXCITED NOW AS IT IS REALLY TAKING SHAPE NOW :wink: I SHOULD HAVE HEADLIGHT BRACKETS AND OIL PRESHURE GUADGE DONE BY END OF THE WEEK.

brian 450
Custard Cream
Custard Cream
Posts: 670
Joined: 2nd Sep 2008
Location: East Sussex

#487 PostAuthor: brian 450 » Wed Nov 18, 2009 7:48 pm

Image

brian 450
Custard Cream
Custard Cream
Posts: 670
Joined: 2nd Sep 2008
Location: East Sussex

#488 PostAuthor: brian 450 » Wed Nov 18, 2009 7:49 pm

Image

User avatar
tlc
International Rep
Posts: 5239
Joined: 6th Nov 2007
Location: Aylesbury

#489 PostAuthor: tlc » Wed Nov 18, 2009 7:54 pm

I notice they`re not No. 7 bolts on the cooler Brian :no
Asphalt Cowboy

Phil Churchett award winner 2015

brian 450
Custard Cream
Custard Cream
Posts: 670
Joined: 2nd Sep 2008
Location: East Sussex

#490 PostAuthor: brian 450 » Wed Nov 18, 2009 8:31 pm

what's no7 bolts?

User avatar
coldsummer
Hardcore
Hardcore
Posts: 3211
Joined: 29th Jun 2009
Location: Berkeley

#491 PostAuthor: coldsummer » Wed Nov 18, 2009 9:13 pm

I still think you should have stuck with that red and black colour scheme Brian. I personally think the whole look of the bike is spoiled by that grey furry finish :lol:

brian 450
Custard Cream
Custard Cream
Posts: 670
Joined: 2nd Sep 2008
Location: East Sussex

#492 PostAuthor: brian 450 » Wed Nov 18, 2009 9:29 pm

Its cheaper than paint

User avatar
GUYZED
Area Rep.
Area Rep.
Posts: 2107
Joined: 9th Aug 2008
Location: READING - BERKSHIRE

#493 PostAuthor: GUYZED » Thu Nov 19, 2009 2:02 pm

coldsummer wrote:I still think you should have stuck with that red and black colour scheme Brian. I personally think the whole look of the bike is spoiled by that grey furry finish :lol:


It could have been worse - he could have used leopard skin :lol:
OLD ZED'S NEVER DIE THEY JUST GO FASTER...
#449
Z1000A2 Z650B1

brian 450
Custard Cream
Custard Cream
Posts: 670
Joined: 2nd Sep 2008
Location: East Sussex

#494 PostAuthor: brian 450 » Sun Nov 22, 2009 7:20 pm

It's been a long stressfull day today wedged in the corner of the garage between the wall and the bike with not much room to move :evil: Making a couple of chain runners couldn't get the drill in and didn't want to strip bike down again and get swingarm out so had to go and get a air drill once i got that it all went ok :D Also fitted the coils. I have been chatting to the chap i bought the bike of he says the previous owners dad says the engine has been tuned but he is not sure what has been done :D :D He also says he's son took it to have work done at a local bike shop just before he fell ill. New gear selectors ect i dont know what they did but it cost him £1500 quid to get it back just before i got it as he wanted it back for when he's son came out of hospital but he never has he is really ill and is never coming out, He has asked me if he can have a pic of the bike before an after.

User avatar
Surfdeneige
Custard Cream
Custard Cream
Posts: 694
Joined: 8th May 2005
Location: Banchory (Centre of the Universe)

#495 PostAuthor: Surfdeneige » Sun Nov 22, 2009 7:38 pm

This really is a cracking project. I'm pretty sure it is setting records in the no. of viewings too.
A ken fit like!


Return to “Projects”

Who is online

Users browsing this forum: No registered users and 7 guests