
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
stretch Limo
-
- 100Club
- Posts: 126
- Joined: 30th Nov 2007
- Location: leicester,uk
looks nice as is
Is it a custom variant?
looks great as is!
drew
looks great as is!
drew
- paul doran
- Area Rep.
- Posts: 15910
- Joined: 24th Sep 2004
- Location: near Dublin Ireland
Drew - I'm not really sure what it is, I think its a z1100a1 shaft, it's a us import so might be different to what we have here. The seat may have been altered a bit and Im tempted to loose the rear mudguard and fit some drop bars:D
It's certainly not short of go but its in bits in the garden at the minute - the handling was awful, shook its head in to corners so Ive replaced the knackered head bearings and rebuilt the front forks. Not had chance to test ride it yet as the tank sprung a leak when it was filled with fuel, Ive since traced it to a crack in the tank rear mount that only opened up with weight on it. Im going to try and weld it up tomorrow. Good luck may be required.
It's certainly not short of go but its in bits in the garden at the minute - the handling was awful, shook its head in to corners so Ive replaced the knackered head bearings and rebuilt the front forks. Not had chance to test ride it yet as the tank sprung a leak when it was filled with fuel, Ive since traced it to a crack in the tank rear mount that only opened up with weight on it. Im going to try and weld it up tomorrow. Good luck may be required.
Who is online
Users browsing this forum: No registered users and 5 guests