Page 1 of 1
VJMC - POPHAM 3rd April
Posted: Sun Mar 27, 2016 9:33 am
Author: Pigford
Posted: Sun Mar 27, 2016 12:29 pm
Author: ADRIAN H
Forgot this was on. I will be there weather permitting.
Posted: Sun Mar 27, 2016 12:30 pm
Author: Pigford
ADRIAN H wrote:Forgot this was on. I will be there weather permitting.
Me too! Uk Kev is going as well

Posted: Sun Mar 27, 2016 12:49 pm
Author: ADRIAN H
What time are you likely to be there.
Posted: Sun Apr 03, 2016 9:08 pm
Author: ddg900
went to the autojumble today. bagged a couple of bits, so worth the trip. saw a nice shiny P-reg 900A4, single disc, 4-1, parked just outside the entrance. Was getting a lot of attention from the punters as they went in/out . Even after 40 years, they still draw a crowd

Posted: Mon Apr 04, 2016 6:16 am
Author: chrisu
Where were you piggy???
Ironing?
Posted: Mon Apr 04, 2016 6:29 am
Author: Taffus
ddg900 wrote:went to the autojumble today. bagged a couple of bits, so worth the trip. saw a nice shiny P-reg 900A4, single disc, 4-1, parked just outside the entrance. Was getting a lot of attention from the punters as they went in/out . Even after 40 years, they still draw a crowd

That was mine

Posted: Tue Apr 05, 2016 12:04 am
Author: ddg900
.. and very smart it was too!
I had a quick chat to a nice couple parked up next to yours (on a Tiger 900xc, IIRC) who had made the trip from the IoW, and we had a good old parley about 900s, CB200s (the lady bought the red one on offer at the jumble!) and all things bike related. In the few minutes I was there, I saw a fair few people wander over for a look and take snaps on the phone cams - there's just something about the 900 that 'does it' for many!
Posted: Tue Apr 05, 2016 8:37 am
Author: Taffus
She came up talked to me and ChrisU which was fortunate as it was Chris who built the bike!
Posted: Tue Apr 05, 2016 6:23 pm
Author: ddg900
Expect you saw her tootling around the field on that CB200 then?

Were you manning a stall? - I did see one that looked to have a few Emgo/Doremi (?)replacement handlebar switch assemblies for the UK 900A4, but didn't spot anything else that was Z-orientated (mind you, my eyesight isn't as good as it once was!)