Page 1 of 2
Kill switch wires help
Posted: Sat May 23, 2009 9:22 pm
Author: Davy Doherty
I took the wires out of this because i was going to robb the top switch off it for my Z1, Thing is it's a NOS H2B switch so it would be crazy to do that, i'm sure someone could use it, anyway does any of you lads have one and could have a look and let me know which wire goes where,
Posted: Sun May 24, 2009 4:34 pm
Author: Big Fluff
Davy
I've had a look at all my genuine workshop schematics and that switchgear doesn't match any H1 or H2 !
However, it's straight forward enough.....
Brown = Ign live (switched)
Yellow = Feed from kill switch to coils
Lighter Blue = Fused supply to lights on/off
Blue = Lights feed to LH switchgear (for dip/beam)
Regards, Will.
Posted: Sun May 24, 2009 5:06 pm
Author: hillbilly
do you want to know which holes the wires go back in.
Posted: Sun May 24, 2009 6:27 pm
Author: Davy Doherty
hillbilly wrote:do you want to know which holes the wires go back in.
Yes hillybilly thats excatly what i'm asking, i should have made that clear maybe.
Davy
I've had a look at all my genuine workshop schematics and that switchgear doesn't match any H1 or H2 !
Will i've had this problem also but i've been told my Malc it's a h2b?
Posted: Sat May 30, 2009 6:28 am
Author: Davy Doherty
Poor old me, no one gives a toss.
Posted: Sat May 30, 2009 7:55 am
Author: hillbilly
just had a look at some switches i have,and the wires arnt same.sorry but no help here.
Posted: Sat May 30, 2009 9:53 am
Author: Keefleaf
Maybe off Z750 twin.
Posted: Sat May 30, 2009 12:14 pm
Author: RGH
Davy Doherty wrote::cry: Poor old me, no one gives a toss.
fits S1B 74 250 SMOKER STROKER
S1C 75 250 SMOKER STROKER
S3 74 400 SMOKER STROKER
S3A 75 400 SMOKER STROKER
PRETTY SAD WHEN HELP COMES FROM OTHER SIDE OF THE WORLD
Posted: Sat May 30, 2009 1:56 pm
Author: Davy Doherty
Thanks mate yous Aussies are always a helpfull bunch. If i cant find out where the wires go i'm gonna rip it apart and use it for spares..
Posted: Sat May 30, 2009 2:03 pm
Author: RGH
sell it to RB (for double of course) he could use it on one of his 200+ tripples
Posted: Sat May 30, 2009 3:00 pm
Author: floydsz1
wonder if it could be used on my z1a, it looks the correct switch(small S) , apart from the wires
Posted: Sat May 30, 2009 3:03 pm
Author: gbh
Davy, just out of curiosity...what numbers are stamped on the lower half of the switchblock where it would butt against the handgrip? That will tell us the year and month of manufacture.
Posted: Sat May 30, 2009 3:14 pm
Author: Davy Doherty
It's Dec 73 George, And No floyd it wouldn't fit the Z1 range it's a totally different switch Theres only one access hole for the throttle cable and it's a bit bigger all round.. A damm good spare to break all the same but if it helps get the trippples smokers off the road so be it
Posted: Sat May 30, 2009 3:25 pm
Author: gbh
Thanks Davy, I think the best bet is to put it on eBay and be sure to include all the relevant info to ensure a high price and a happy customer.
Keep your eyes open on eBay and the part you need will show up, I once picked up a NOS kill switch in its bag with label for around $10USD....Sorry I can't let it go to you as it will someday adorn my own resto.
Posted: Sat May 30, 2009 3:44 pm
Author: floydsz1
thanks davy,
was just a thought, but if its from a triple then why does it have the 's' which on the zeds its for start. or am i getting confused again.
i do have 2 early zed switches but they need a full refurb.