Page 1 of 1
Another Chain n Sprocket Question
Posted: Sun May 10, 2009 1:25 pm
Author: bigmac103
Can you use the same chain for the 35 and 33 tooth rear sprocket?
Thankz
B
Re: Another Chain n Sprocket Question
Posted: Sun May 10, 2009 3:38 pm
Author: compo z1r
bigmac103 wrote:Can you use the same chain for the 35 and 33 tooth rear sprocket?
Thankz
B
yes if its the same pitch.
Posted: Sun May 10, 2009 5:13 pm
Author: Pigford
Bigmac.... as long as you keep to the same format - ie: 630 or 530 ..etc.
If you're replacing an old knackered sprox with a new one, then there may be rapid wear on the new sprox, as the cahin set wears/stretches with use
Posted: Sun May 10, 2009 8:35 pm
Author: Garn 1
Guys, I think BigMac is concerned about the length of the 630 chain. That is, will the 33 sprocket with 2 less teeth still fit in the adjustment range of the usual 92 link chain? Or, will he have to remove a link? I not sure of the answer I think it both sprocket would serve the one chain length.... Could be wrong!
RegardZ.
Posted: Sun May 10, 2009 8:55 pm
Author: floydsz1
I have fitted z900A4 rear sprox to a Z1 ie a smaller rear to lower revs for better cruising etc without having to remove a link, unless the chain is very worn and stretched.