Z1OwnersClub GB

Right then, straight to it, does anyone have the correct measurement for the service limit length on the standard springs in a '76 A4 and the correct amount amount of oil to use?
I will be getting progressive springs at some stage but they aint in the budget at the minute (actually the bike itself was'nt in the budget either,lol).

I have a complete kawasaki manual for the Z range and the info this gives me is, free length: Springs Good- 495.5mm, service Limit- 485mm. The amount for the oil is 5.7 fl.oz.
Now, the free length of my springs are 464mm each, I understand they get shorter as they weaken but am I also correct in thinking that not all models have spacers (40mm) under the cap nut and so would have a different spring?
I also found on some various rebuilds that 6.5fl.oz of oil was used in the forks.
Any info and help appreciated, cheers.

From the genuine manual, the fork springs for the A4 should be; Standard - 465mm, service limit - 455mm.
The figures for Z1 are; Standard - 505.5mm, service limit - 495.5mm.
Fork oil capacities for the A4 are; 5.7 - 6.0 or 170 - 178cc.

Thanks for that Phil, much appreciated, I would have gotten the new springs if it was essential and the old ones were out of limits, but I still got a list of other bits to buy so I gotta prioritise at the minute.

Thanks again mate.

No problem.