Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Helicoil - Large threads
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Helicoil - Large threads
The spindle thread in the USD forks on me Zed (female thread) is a bit naff.... Its a 20mm thread.... Can you get helicoils to repair these
And on the 7th day... Zeds were created!
-
Steve Cooke
- Hardcore
- Posts: 1612
- Joined: 18th Mar 2007
- Location: Southampton
Mark Uni-Thread do 20mm but you need the set to do it, as in tapping drill, tap,insert and insertion tool, depending on the pitch their prices for a boxed kit are 2.5mm pitch = £58.25
2.0mm pitch = £61.50
1.5mm pitch = £67.50
if you just have the drill,tap and insert they're about a tenner less, you could also try Tracy Tools 01803 328603 I think they are linked with Uni-Thread in some way but for some items they can be a bit cheaper.
2.0mm pitch = £61.50
1.5mm pitch = £67.50
if you just have the drill,tap and insert they're about a tenner less, you could also try Tracy Tools 01803 328603 I think they are linked with Uni-Thread in some way but for some items they can be a bit cheaper.
Who is online
Users browsing this forum: No registered users and 25 guests