valve sizes
Posted: Fri Mar 27, 2009 8:05 pm
could someone tell me what the valve sizes are ,inlet and outlet.for 1973 z1 900.(cant find mi book)and is the z1000 valve size the same. 
cheers.
cheers.Z1OwnersClub GB
Kawasaki's Air Coooled Big Fours
http://rtest.z1ownersclub.co.uk/phpBB3/
valve sizes
http://rtest.z1ownersclub.co.uk/phpBB3/viewtopic.php?f=4&t=8720
Page 1 of 1
Posted: Sat Mar 28, 2009 3:54 pm
ok i wont ask out else.
Valves
Posted: Sat Mar 28, 2009 4:24 pm
My understanding is:-
Exhaust Std 30mm
Inlet Std 36mm
Oversize +1mm
If you look on the debben site, Same sizes/part numbers are listed for both 900 and 1000.
There you go, keep asking.
Exhaust Std 30mm
Inlet Std 36mm
Oversize +1mm
If you look on the debben site, Same sizes/part numbers are listed for both 900 and 1000.
There you go, keep asking.
Posted: Sat Mar 28, 2009 6:54 pm
Keep asking Hillbilly, that's how we all learn. 
Posted: Sun Mar 29, 2009 7:05 am
Hillbilly, for what it's worth. I do recall reading a road test on the introduction of the Z1000-A1, It stated that the valves were 1 mm larger than the Z900.
I have never been able to verify this.
RegardZ.
I have never been able to verify this.
RegardZ.
Posted: Sun Mar 29, 2009 11:00 am
thank you to all that replied,info received,and passed on to the engineer that is doing my cylinder head rebuild. 