Page 1 of 2
Grab rail any ideas?
Posted: Tue Feb 10, 2009 7:59 pm
Author: Vince@Z1b
Peoples
The photo below is of the grab rail that was attached to my Z1 when I acquired it, not the original, fixed on with some brackets.
I've since replaced it, but I'm intrigued, what’s it from?
I'd like to find it a good home.
It’s not off a triple according to the good Mr RB?
Any suggestions???
Posted: Tue Feb 10, 2009 8:07 pm
Author: tlc
LTD ?
Posted: Tue Feb 10, 2009 8:35 pm
Author: Keefleaf
I think Padders needs one,P.M.him.
Posted: Tue Feb 10, 2009 8:54 pm
Author: Vince@Z1b
Padders, Padders, someone point me at Padders!!
By the way if it helps
It's 155mm Centres between the Shock mount and the spigot
Posted: Tue Feb 10, 2009 11:03 pm
Author: Padders
Dazzler has sorted me one thanks. This is not a Z900Ltd one as it is too square at the corners.
Posted: Tue Feb 10, 2009 11:46 pm
Author: Al
Its not a J1 one!!
AL
Posted: Wed Feb 11, 2009 6:16 am
Author: ade woollams
hi ya rb should know what he is on about but i would have said KH250 as im doing on up at this time .
grab rail
Posted: Wed Feb 11, 2009 8:35 am
Author: compo z1r
looks v sq like the z1r rail ill' check mm to mine and see if its one
Posted: Wed Feb 11, 2009 9:15 am
Author: Vince@Z1b
The KH's should have the indicator lugs
I thought it might have been an S1/S3 but 70 hits on this pic on the Triple site only sparked 1 response from RB with Z750?
grab rail
Posted: Wed Feb 11, 2009 10:36 pm
Author: compo z1r
defo' z1r grab rail same 155mm centres its a early type one
Posted: Thu Feb 12, 2009 6:07 am
Author: ade woollams
the s1 never had ind brackets.
Posted: Thu Feb 12, 2009 6:52 am
Author: mikey
Just to throw another mix in the pot it looks like the grab rail on my old Z750 twin i had years ago, just had a look at some old pics of it and it looks very much the same.
Posted: Thu Feb 12, 2009 7:28 am
Author: mick znone
ebay it Vince, with a question mark, that would get it on a bike for sure.
Grab Rail
Posted: Thu Feb 12, 2009 12:18 pm
Author: fredswat
Looks similar to an LC350
Posted: Thu Feb 12, 2009 5:16 pm
Author: tlc
Twin shock LC350.
Now there`s an idea
