Z1OwnersClub GB

Posted: **Sat Jan 31, 2009 1:07 pm**

I got some new Kawasaki rear footpegs but the holes on the pegs don't line up with those on the bracket. Any tips on how to make them fit?
Thanks

Posted: **Sat Jan 31, 2009 1:13 pm**

You should be able to force it by compressing the rubber then it wont rattle when fitted as long as the metal is not bottoming out on the inside.

Posted: **Sat Jan 31, 2009 3:07 pm**

What he said.

The rubber acts in the same way as a compression spring.

Posted: **Sat Jan 31, 2009 5:40 pm**

you could try putting the pegs in hot water for 5mins, if they are tuff.

Posted: **Sun Feb 01, 2009 5:26 am**

Thanks for your help. I had tried compressing the rubber but hot water was the key for these ones.

Posted: **Sun Feb 01, 2009 8:34 am**

thats cool man, i found this method out after struggling with condoms, leave them in hot water for 5mins, then they will stretch to my size. incidently, 5mins i find is just enough time for the foreplay :lan

Z1OwnersClub GB

Z1000-A1 rear foot peg fitting

Z1000-A1 rear foot peg fitting