Page 1 of 1
Brake failure relay
Posted: Sun Jan 25, 2009 4:32 pm
Author: PAULJAC47
Hi All.Does anyone know where the brake failure relay is located on a Z1b and how to indentify it is not detailed in my manual only on the circuit diagram?
Posted: Sun Jan 25, 2009 9:24 pm
Author: Garn 1
Pauljac47, the brake outage unit on the Z1B is mounted off the left-hand-side coil, under the tank. It has a small special bracket and the unit is mounted in a rubber sheaf. The rubber is usually perished and tape is often used to retain the unit to the bracket.
RegardZ.
Posted: Mon Jan 26, 2009 5:58 pm
Author: PAULJAC47
Thanks Garn1, found unit ,can see in z power parts book as switch outage indicator but no part number!! must be unobtainable any way to test apart from substitution?
Posted: Mon Jan 26, 2009 6:19 pm
Author: tlc
As far as I am aware if the unit fails then the lamp in the console will flash when the brake light is applied even though the lamp is okay.
They are available and I have seen for $60 new but also periodically on fleabay starting at $30.
If you save a search for "switch outage indicator" then they will show.