Z1OwnersClub GB

Posted: **Mon Jan 19, 2009 11:22 pm**

Hi all,Can any one help me identify the engine i have here, it came to me with no casings and no altinator. I have fitted standard casings from a Z1000 A1 inc the rocker cover with no problem, the problems started when trying to find a rotor nothing from the early engines fits.
When it came to me it had square rocker tops. The engine number is KZTOOAE 076842 which is a later number and if it helps i think its from the USA. And its chain drive

Many Thanks Mick

Posted: **Mon Jan 19, 2009 11:43 pm**

it's a MK2 motor
the crank has a different taper and the 900 rotor won't fit
the alternator is also different as is the outer casing

Posted: **Tue Jan 20, 2009 10:42 pm**

Thanks Paul, now i can start to look for the parts i need to complete the motor.

Posted: **Wed Jan 21, 2009 8:32 am**

hi foreverinthe garage , i have a rotor from a z1000st which i think is the one you want. i need a 900 type rotor....wanna swop? regards al

Posted: **Thu Jan 22, 2009 12:01 am**

Al I can help

Posted: **Thu Jan 22, 2009 12:29 am**

Thanks Al But i think i have a rotor now, the bits i still need are the engine case and the windings.

Many thanks for your reply, Mick

Posted: **Thu Jan 22, 2009 8:42 am**

cheers paul, you have pm

Z1OwnersClub GB

Which engine is this

Which engine is this

rotor

roror