Z1OwnersClub GB

Posted: **Tue Oct 07, 2008 3:53 pm**

Started reassemblying my MK2, long way off from fitting the airbox but kept looking at it and it just didnt look right, it wasnt fitted to the bike when i got the bike, so my Question is the airbox on a MK2 the same as an A1/A2? cuz the airbox i got with my MK2 is completely diffrent to my A2 airbox and out of curiosity i offered it up and it dont seem to fit in the frame and none of the mounting holes on the airbox seem to match up to anything on the frame, confused? i know i am. :??

Posted: **Tue Oct 07, 2008 4:05 pm**

got any photos.

mine does not look vastly different.

Posted: **Tue Oct 07, 2008 4:10 pm**

I`ve just looked at my magazine and it is totally different under the seat to the A1 / A2.

It looks like the intake trumpet sits below the battery box / tool tray !

Posted: **Tue Oct 07, 2008 5:16 pm**

just checked on a microfiche site- says airboxes are the same part number.

me now confused............

Diagram for the a1/a2 Z1000

Diagram for the Mk2 (A3/A4)

Posted: **Tue Oct 07, 2008 5:28 pm**

Prob`ly right Chris.

I was looking at the ST in my magazine. Are they different ?

Posted: **Tue Oct 07, 2008 5:35 pm**

Mikey the air filter housings for the A4/A1/A2/Mk2 are all quite similar, apart from the silencers the main differences are in the gauze filter area and a few of the indentations of the shape, as far as i'm aware they will all fit each other (of a sorts) in fact I have a Mk2 box here which was fitted to my A1 when I first got it. When you say the fixing points don't match up what do you mean as there aren't any other than on the silencer (I think).

Posted: **Tue Oct 07, 2008 6:54 pm**

looks like the ST airbox is VERY different..........

Posted: **Tue Oct 07, 2008 7:03 pm**

Thanks for all the replies guys, sorry dont have any pics im a pc dummy dont know how to do it, But here goes, on mine the air filter housing is the same as the one in chrisu's pics except where its cut out to fit between the frame rails, on mine the cut outs are on an angle and there are no bolt holes in the bottom for the airbox stay, and the breather half is a square box with a trumpet on it.
But on the back of my frame is the mounting bracket to bolt the breather box to but there is nothing on the breather box to bolt it to.

Posted: **Tue Oct 07, 2008 7:05 pm**

Yes chris thats the one i got so thats the wrong one then
:evil:

Posted: **Tue Oct 07, 2008 7:07 pm**

Yes chris thats the one i got so thats the wrong one then
:evil:

Posted: **Thu Oct 09, 2008 10:08 am**

here you go Mikey - although I have to say you don't really need one....

I also saw Hobbo was selling some (I think) - check his recent posts.

Posted: **Thu Oct 09, 2008 2:01 pm**

Cheers chris the airbox im getting dosent have a silencer so thought the bracket would steady the airbox a bit more.

Z1OwnersClub GB

Airbox confusion

Airbox confusion