Page 1 of 1
engine paint, remove or keep black?
Posted: Sat Aug 30, 2008 3:50 pm
Author: PHILIP SHAW
hi, i've got a z1000 a2 and the top part of the engine has been previously painted black. i would like your advice on whether i should keep the engine black or remove it. the finish underneath is rough cast alloy, not polished.
thanks.
Posted: Sat Aug 30, 2008 3:52 pm
Author: Pigford
Deja vous
Posted: Sat Aug 30, 2008 3:53 pm
Author: tlc
Posted: Wed Sep 17, 2008 7:23 am
Author: 02GF74
i would remove it.
paintstripper and a small toothbrush should do the trick but if doing it with engine still in frame, then mask off frame and other bits first!
Posted: Wed Sep 17, 2008 12:31 pm
Author: eastlondon
I dis my engine on my z900 which had been painted all black. Nitromor paint remover and instead of a using tootbrush, use a one inch paint brush with the bristle cut down half way.
