Page 1 of 1
plastic chain guard
Posted: Tue Jul 08, 2008 8:00 pm
Author: z2.john
The chain guard changes part number (36014-045) for Z1/Z1A to part number (36014-061) for Z1B/Z900.
Anyone know what the difference is? Look the same to me.
Posted: Tue Jul 08, 2008 8:12 pm
Author: 000zeds
Dave Marsden at Z-Power will let you know !
Posted: Tue Jul 08, 2008 9:40 pm
Author: london calling
It might be due to the chain oiler as fitted to Z1/Z1A whereas the Z1B had an 'O' ring chain fitted
Posted: Wed Jul 09, 2008 1:15 pm
Author: steve
John....I'm fairly sure the width of the chain guard is slightly wider on the Z1B to cater for the o-ring chain. To be honest though, I haven't actually measured the difference between the two.
Steve
Posted: Wed Jul 09, 2008 6:27 pm
Author: Davy Doherty
Bang on steve, it's slightly wider.
Posted: Wed Jul 09, 2008 8:39 pm
Author: z2.john
Thanks for the replys. Suppose it's obvious when you think about it.