Z1OwnersClub GB

Posted: **Sun Jul 06, 2008 8:07 pm**

I need a tool to peen the end of a soft link camchain in place, anyone
recommend one :?:

. Tried looking on Ebay but they all seem to be bicycle ones.

Ta. Mike

Posted: **Sun Jul 06, 2008 8:13 pm**

There are such tools shown in the M&P catalogue, though I haven't got one so I cant vouch for them.

In the past, with a very careful cover up job I have ground the rivets off, but I'm the first to admit this is bad practice :roll:

Posted: **Sun Jul 06, 2008 10:32 pm**

This is on the Z1 enterprise web site, is this what you are after :wink:

http://www.z1enterprises.com/detail.aspx?ID=1693

Posted: **Mon Jul 07, 2008 2:59 pm**

I have used the M&P tool and it works fine, the coplete kit cost Ã‚Â£49,
for that you can split, press and join all chains up to 530, 630 needs the help of a grinding tool.
hope this helps. www.mandp.com part no 500600.

Posted: **Mon Jul 07, 2008 10:35 pm**

Thanks guys I'll invest in one of these very shortly.

Ta.
Mike

Z1OwnersClub GB

Camchain rivet tool

Camchain rivet tool