Page 1 of 1
Crank
Posted: Mon Jun 30, 2008 6:42 pm
Author: PJones
Hi guys eventually I will be building a Z900 to go with the Z1000 (Lily Grace - Depending), however after checking all the boxes, 5 yrs later it looks like there is no crank. There is one on ebay for a Z1000A1 / A2 are they the same??
Cheers
PJ
Posted: Mon Jun 30, 2008 6:54 pm
Author: phil churchett
Paul, Z Power's parts book lists different part no's for the 900 and 1000.
It is worth calling Dave in the morning to find out exactly what the difference is.
Posted: Mon Jun 30, 2008 6:59 pm
Author: PJones
phil churchett wrote:Paul, Z Power's parts book lists different part no's for the 900 and 1000.
It is worth calling Dave in the morning to find out exactly what the difference is.
Cheers Phil
Posted: Tue Jul 01, 2008 12:18 pm
Author: Big Fluff
The 900 cranks are 'webbed' whereas the Z1000 cranks are full flywheel.
If you're using standard height pistons you're ok with either.
If like me you're using taller 'turbo' pistons then you have to use the webbed crank to stop the pistons smacking into the crank as you approach BDC.
