Page 1 of 1
z1000a2 voltage regulator query?
Posted: Wed Jun 25, 2008 3:41 pm
Author: 02GF74
this sits under RH panel; is an aluminium case about 50 x 30 mm in size and there is a small screw in the case (not one of the bolt/screws that holds it to the frame)?
what is the purpose of the screw? (removes aluminium cover)? or some other purpose.
Posted: Wed Jun 25, 2008 6:04 pm
Author: Pigford
Hmmmmmm, mark it with paint, unscrew it (counting turns - just in case) and see what happens
Don't forget to report your findings......
Posted: Wed Jun 25, 2008 6:07 pm
Author: Steve Cooke
Don't touch that screw as it is an integral part of the regulator and has nothing to do with the casing if you turn it you'll f**ck it.
Posted: Wed Jun 25, 2008 6:12 pm
Author: Pigford
Cheers Steve
... there you go, as I said, don't touch it
Posted: Thu Jun 26, 2008 8:29 am
Author: 02GF74
^^^ LOL - 's what I thought.
Posted: Thu Jun 26, 2008 11:11 am
Author: RALPHARAMA
Steven Cooke wrote:Don't touch that screw as it is an integral part of the regulator and has nothing to do with the casing if you turn it you'll f**ck it.
Is it that much of a turn on, that turning the screw that you would be overcome by such insatiable lust. I hope I didn't throw my old one out
On second thoughts I won't look, I may be wracked with guilt afterwards, not to mention in misshapen member
Posted: Fri Jun 27, 2008 5:22 pm
Author: Steve Cooke
Fortunately i'm still turned on by even a little screw.