Page 1 of 1
Who sells good rearsets for Z1000 A2
Posted: Mon May 19, 2008 12:48 pm
Author: Wobbles
Not having much luck finding really nice ones.
Anyone have any clues?
Thanks again,
Hilton.
z-power
Posted: Mon May 19, 2008 3:22 pm
Author: KWACKERZ1
Try z-power as within the pmc catalogue (one of their suppliers) they have some very nice rearsets, which they maybe able to source for you.
I think they also stock tarozzi ones which are quite nice and actually work very well with smooth actions.
Cheers
Phil
Posted: Mon May 19, 2008 3:31 pm
Author: ash
Klasmo in Germany did, don't know whether they still do them go on to their web site,
like the ones i had but mine were called kp,
Z1000
Posted: Mon May 19, 2008 4:27 pm
Author: PJones
Sorry to butt in - hey ASh that looks great,
What spec is the bike?
Cheers
PJ
Posted: Mon May 19, 2008 6:46 pm
Author: Pigford
PJ, leave poor ASH alone, its a sore subject.... as he had to let it go
Posted: Mon May 19, 2008 9:22 pm
Author: PJones
Pigford wrote:PJ, leave poor ASH alone, its a sore subject.... as he had to let it go
Bugger - sorry didn't know, pigford do you know what was used for the front and rear end?
Posted: Tue May 20, 2008 6:49 am
Author: ash
Paul i,ll let you know laters when im home from work
Posted: Tue May 20, 2008 9:53 am
Author: Wobbles
http://www.klasmo-bikes.de/land.php?aus ... s=&search=%%%&smodel=1314&sccm=*&sbj=*&start=0&kategorie=17&KAT_Hauptgruppe=&Haupt_WG=5&artikel_zaehler=1&angebot_main_kat=%
Hope this link works - Klasmo do Tarozzi ali ones. Just have to make sure they'll fit a z1000 - they have them listed under 'Classic Z1000'.
Cool, thanks again guys
Posted: Tue May 20, 2008 10:32 am
Author: Gus
Posted: Tue May 20, 2008 11:51 am
Author: ash
Here you are Paul,
Ok the front end is off a 1990 zxr750 complete accept for the top yoke which was changed for raisers, Only thing you have to do is change the top bearing for a gxsr 750 or 600 Katana then its bolt on, Rear end is off a zypher 1100 but it has now been changed for a zrx1200 swingarm and the shocks are from the 1100 zrx, modification work had to be done to the frame in the way of shock mounts had to be altered for the difference in width, rear sprocket carrier had to have 5mm taken off to accomodate the offset front sprocket, if anyone wants to know more on the mods please email i,ll be happy to tell,
Re: Who sells good rearsets for Z1000 A2
Posted: Sun Jun 15, 2008 10:44 pm
Author: z1bnackerkwacker
Wobbles wrote:Not having much luck finding really nice ones.
Anyone have any clues?
Thanks again,
Hilton.
Maybe a bit late but seen these?....Could be a bargain......
http://cgi.ebay.co.uk/Kawasaki-Z1-Z900- ... 286.c0.m14
Posted: Tue Jun 17, 2008 2:48 pm
Author: Wobbles
Cheers z1bnackerkwacker.
Much appreciated