Page 1 of 1
clutch side sprocket casing
Posted: Wed May 14, 2008 10:05 pm
Author: jamfan
Hi lads, My gear change shaft is sloppy in the outer casing. I have removed this to look at. Is there a bushing that can be replaced or is it the casing that wears. I'm not sure as I cant see one. (the thread has also gone in the clutch cable and will require helicoiling)
thanks for any help.
Posted: Thu May 15, 2008 5:14 am
Author: london calling
Thread on the clutch cable
Which model Z is it ?
Posted: Thu May 15, 2008 6:54 am
Author: RALPHARAMA
If memory serves me right the shaft is supported by the aluminium casting. But there is no reason why this couldn't be carefully opened up and have a phosphor bronze bush fitted, though you would need it done by someone who is a reasonable engineer.
Posted: Thu May 15, 2008 9:46 pm
Author: jamfan
The thread on the housing where the cable enters the casing is stripped. It's my B2.
many thanks