Z1OwnersClub GB

Posted: **Sun May 04, 2008 4:22 pm**

hi guys got set of dyna coils on my zed just wondering the best way to mount them on the frame as sing stanard spacers one of them fouls the tank and thebody of the coils seem very close to them frames rail to any guys got a pic of how they mounted them
cheers

Posted: **Sun May 04, 2008 5:06 pm**

There is a recent thread about this somewhere.....

Make sure the spacers are long enough so the coils DO NOT get forced againts the frame :shock:

Posted: **Sun May 04, 2008 6:09 pm**

ok cheers piggy think i may need longer spacers to mount them like that

Posted: **Sun May 04, 2008 6:29 pm**

Ninjabob, as you can see, its common practice to insulate the space post next to the low tesion connections of the coils... :wink:

My old Gixxer caught me out once, when I put Dyna's on it and the post was very close to the contacts and when the bike warmed up it all must have expanded a bit & caused a short..... and as it was usually after a mile or 2, a long push home :evil:

Took me a while to suss out :cry: