Page 1 of 1
900a4 MC
Posted: Mon Mar 24, 2008 6:42 pm
Author: sweptail
hi folks. Can anyone tell me if the clear sight plastic on my double disc master cylider separates from the ally. If so , how? Actually,im having it painted so i might be able to get away with masking off. what do you erudite z owners think. anyone know where i can get fork oil circlips from. Cheers Tommy
Posted: Mon Mar 24, 2008 6:53 pm
Author: Padders
Mick took mine apart and fitted a new seal kit. There are two screws at the bottom of the site glass once taken out the plastic is still a very tight fit and needs a bit of brute to shift.
Posted: Mon Mar 24, 2008 8:46 pm
Author: Hack
Yes, Padders is right. If you look inside there should be a perforated metal plate held in by two cross headed M5 screws. Remove these and the plastic body should twist out of the master cylinder.
You will need a new 'O' ring when you re-assemble the unit.
Cheers,
Andy
Posted: Tue Mar 25, 2008 9:36 am
Author: sweptail
thanks lads. tommy