Z1OwnersClub GB

The speedo on my CSR only goes up to 80 / 90 MPH. Does anyone know what other speedos I can replace it with? I'd like to keep the same dimensions as the current clocks - just need the indications to go up to 140 / 160 MPH. Did Kawasaki stick with the same internal gearing ratio? The front wheel is 19 inches. Speedo is cable driven.

Cheers.

The CSR was an American only model,the LTD models had an electronic speedo.
Try a Z650 140MPH or Z900/Z1000 160MPH but they are a slightly different style.
Possibly try the Z750 LTD clocks

london calling wrote:The CSR was an American only model,the LTD models had an electronic speedo.
Try a Z650 140MPH or Z900/Z1000 160MPH but they are a slightly different style.
Possibly try the Z750 LTD clocks

There's a Z1R clock going on ebay which look very similar in style - do you think the gearing might be out a tad though? I think the Z1Rs might have had an 18" wheel.

Some Z1Rs had 18" wheels,some had 19".
Haven't got a Scooby Doo about the internal gearing,just suck it and see

It won't make a LOT of difference, just read a tad higher, which has a 2-fold benefit,
1# Think your bikes faster than it really is
2# Make you slower/safer with the old speed camera's

I run 17" GSXR wheels with the standard clock, and it reads a fair bit higher, but no more than +10%

Thanks everyone - snatched it from everyone right at the last minute for ?39 with a despicable sniping proggie. Hope it wasn't from anyone on this board.