Page 1 of 1
clutch cover casing
Posted: Sat Mar 01, 2008 7:13 am
Author: shrekward
any idea where i can get a casing cover for the clutch with a "glass window" to show the inner clutch working for my gpz motor?
Posted: Sat Mar 01, 2008 8:00 am
Author: london calling
Try asking on the Streetfighters MCC website.
There's some good lads on there who'll probably be able to make you one.
http://www.streetfighters-mcc.co.uk/
Posted: Sat Mar 01, 2008 9:22 am
Author: shrekward
thanks london, i'll give um a try
Posted: Sat Mar 01, 2008 12:29 pm
Author: FER
If you try looking in the window when using the clutch I think you would fall off the bike . Is it just me or are they just bling for the sake of bling ?
fer
Posted: Sat Mar 01, 2008 12:38 pm
Author: Pasc
Totally agree Fer.
Cheesier than a tramps knob.
Only my opinion though. Each to their own.
Posted: Sat Mar 01, 2008 5:49 pm
Author: Jumbo
I was going to try and make one of these covers with a window for my bike. Does anyone know what thickness the window is, as it must be perspex that is used for the window.
Posted: Sat Mar 01, 2008 7:06 pm
Author: FER
Chief Thundercloud reckons that leaving the cover off and wrapping engine in clingfilm would do just as good as a window and would be cheaper !
fer
Posted: Sat Mar 01, 2008 10:07 pm
Author: Pigford
Any heat resistant perspex (Makralon, etc) 3mm or more should do, as its only gotta stop a bit of HOT oil leaking out, so it don't need to be to strong
Have a go at making one yerself, nowt to loose, except for a ruined R/H boot
covers
Posted: Sat Mar 01, 2008 10:22 pm
Author: Hobbo
shrek
Try PSYCLEWORKZ THERES A LINK IN Z-POWER DO ALL BILLET WINDOW COVERS FOR ZEDS AND OTHERS COLOURD ONES LOOK SMART
PHIL