Page 1 of 1
z1100r std needlr clip settings
Posted: Thu Jan 19, 2017 7:45 am
Author: swampy
Does any one know the std setting for the needle clip on the above bike.
I have seen it in a post on here before but, I'm buggered if I can find it.
Even better does any one have a link to the base manual download. I have the supplement but not the base manual.
Thanks Chaps
Posted: Thu Jan 19, 2017 8:16 am
Author: z1bman
the last number stamped on the needle is the position the cir clips fits from the top of the needle
Posted: Thu Jan 19, 2017 9:34 am
Author: Gus
z1bman wrote:the last number stamped on the needle is the position the cir clips fits from the top of the needle
Well I never knew that!
Another day in KAWA
SAKI school.
Cheers for that.
Gus
Posted: Thu Jan 19, 2017 4:29 pm
Author: swampy
Good info thank you.
Posted: Thu Jan 19, 2017 4:34 pm
Author: swampy
Ok things have moved on a bit i have 3 x z-0 needles and 1 y-8 needle and 3 x pitted emulsion tubes on my hands.
Guess what? There all NLA. WTF to do now short of buying a set of mikuni rs36.
Posted: Thu Jan 19, 2017 4:36 pm
Author: Gus
Posted: Thu Jan 19, 2017 4:38 pm
Author: swampy
Allens cant get original parts either, but can supply the rs36 kit.
Posted: Thu Jan 19, 2017 9:23 pm
Author: Julian_Boolean
Do dynojet kits have emulsion tubes in them?
Posted: Thu Jan 19, 2017 9:36 pm
Author: z1bman
Posted: Fri Jan 20, 2017 9:51 am
Author: swampy
Bloody hell it works out as £175.00 for 4 tubes and needles before postage!
Any other ideas or leads chaps.