Page 1 of 1
B2
Posted: Sat Jan 14, 2017 9:03 am
Author: big green bus
Can anybody send me the wiring diagram to change the oil light from level to pressure or just how to put the digital light off on B2 clocks.
Posted: Sat Jan 14, 2017 9:35 am
Author: z1bman
to put the light of short the wire to earth . if you are going to change from a level to pressure you will need to find the fitting from an earlier model like this
http://www.ebay.com/itm/Kawasaki-92005- ... 1886424672
Posted: Sat Jan 14, 2017 6:09 pm
Author: big green bus
I have got B2 clocks with a B1 pressure switch so now the light is out, but comes on when if fires up. At worst I will just wire in an oil light in if I cannot sort the B2 display
Posted: Mon Jan 16, 2017 9:47 am
Author: needaz1100r
Are you saying the light is off with the ignition on and comes on when the engine is started?
If so that is an easy fix with a 12v relay.
If you confirm that's what happens I will draw you a mod to change it.
Posted: Thu Jan 19, 2017 6:13 am
Author: big green bus
Yes matey that is the crack
