Z1OwnersClub GB

Posted: **Wed Oct 05, 2016 1:32 pm**

How do you remove a uk z1 steering lock from the yoke? Cheers

Posted: **Wed Oct 05, 2016 2:15 pm**

If its the same as the 1000a1, there is a tiny slotted screw holding it in, take it out and pull the cylinder out, might want a bit of easing oil.

Posted: **Wed Oct 05, 2016 7:15 pm**

remove the rivet & metal flap then insert the key & turn it a quarter turn then pull it out

Posted: **Wed Oct 05, 2016 7:39 pm**

Cheers mate saved me again.

Posted: **Wed Oct 05, 2016 7:40 pm**

Can you re plate them or will it effect the lock.

Posted: **Wed Oct 05, 2016 8:56 pm**

sorry z1 lock is secured with a small grub screw in the bottom yoke i wouldn't advise getting it re plated

Posted: **Wed Oct 05, 2016 9:29 pm**

Not the same as a 1000a1 then :oops:

Posted: **Wed Oct 05, 2016 9:38 pm**

David if its on the side of the head stock follow my instructions in my first reply on this post

Posted: **Thu Oct 06, 2016 9:06 am**

mine has a split type of selok pin in the middle of the lock and 2 slots inside the headstock one for locking and one further down for unlocking so just turn the key quarter of a turn so pin in middle should be able to remove it.this is on my z1a.

Posted: **Thu Oct 06, 2016 9:57 am**

There is a big difference between uk and US steering locks, is your bike a uk one. Cheers

Posted: **Thu Oct 06, 2016 12:16 pm**

yep small barrel with a square locating spigot running along the barrel.

Posted: **Thu Oct 06, 2016 1:29 pm**

cheers will have a play at the weekend

Posted: **Thu Oct 06, 2016 2:03 pm**

[img][img]http://i852.photobucket.com/albums/ab81/z900john/Gabeljoch%20unten%202C%20ohne%20Lenkschloss%20Schlitz%202C%20Neimann%202C%20Bild%202_zpsovuzlkmn.jpg[/img][/img] as z1bman said, quarter turn with the key and pull the lock out.

Z1OwnersClub GB

Steering lock removal

Steering lock removal