Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

calipers

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
royboy
Regular Poster
Posts: 75
Joined: 1st Jan 2013
Location: west london

calipers

#1 PostAuthor: royboy » Fri Sep 30, 2016 6:27 pm

hi all can the front calipers on z900 a4 be changed i.e left put on the right side using the floating braket from the right caliper put into the the left caliper so it sits right on fork leg.
Top
User avatar
CAT3
100Club
100Club
Posts: 184
Joined: 20th Jun 2011
Location: South Manchester

#2 PostAuthor: CAT3 » Fri Sep 30, 2016 9:19 pm

Yes, it's just the mounting brackets that make an assembly left-hand or right-hand.
Image
Top
User avatar
Garn 1
ZedHead
ZedHead
Posts: 1234
Joined: 23rd Sep 2005
Location: Sydney

#3 PostAuthor: Garn 1 » Tue Oct 04, 2016 7:45 am

RoyBoy, agree with Cat3, you will need to spot-face the mounting bracket where it connects to the forks (i.e. get rid of the rounded surface to ensure a snug fit). There is enough meat on the floating caliper to do this.

Note~ if your converting a Kz900 to twin disks the original single disk is much thicker. Also, you will need a 5/8" master Cylinder to make it work effectively.

RegardZ.
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Top
royboy
Regular Poster
Posts: 75
Joined: 1st Jan 2013
Location: west london

#4 PostAuthor: royboy » Fri Oct 07, 2016 11:07 am

thanks all
got hold of a left hand caliper put righ hand bracket in jobs a gooden.
thanks again royboy
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 19 guests