Page 1 of 1
valve clearance
Posted: Wed Sep 14, 2016 2:43 pm
Author: minty
Just checked the valve clearances on my Z1A. All are 0.09 or 0.10 except for 2 exhaust which are 0.12. Would it be better to shim down to 0.07 or leave as is?
All advice appreciated.
Minty
Posted: Wed Sep 14, 2016 3:25 pm
Author: wilsonsjw11
Minty,
Aim for between 0.10mm-0.15mm
Regards
Steve
Posted: Wed Sep 14, 2016 4:10 pm
Author: chrisu
sounds like they're fine to me for now.
originally specification was .05 inlet and .1 exhaust.
Posted: Wed Sep 14, 2016 4:43 pm
Author: zed1015
Either leave as is or re-shim the rest towards 0.15mm.
Posted: Wed Sep 14, 2016 6:19 pm
Author: z1bman
leave it as it is
Posted: Wed Sep 14, 2016 6:56 pm
Author: minty
Thanks guys the advice is much appreciated. Will leave as is.