Page 1 of 1
Petrol t-piece for Mikuni's wanted for between carbs 2-3
Posted: Fri Aug 19, 2016 4:12 pm
Author: KWACKERZ1
Hi,
My set of 28mm mikuni's have started weeping petrol between carbs 2-3 where the petrol pipe attaches and feeds the two banks of carbs.
Anyone have a good one kicking about or know who may have one on the shelf they are prepared to sell.
(I will try allens if I have no luck on here)
Its part 31 on this diagram.
[/url]http://www.cmsnl.com/kawasaki-kz1000d1-z1r-1978-canada_model15397/partslist/66514.html#results[url]
Or a cheap set of 29mm smoothies would help?
[/url]
carbs
Posted: Fri Aug 19, 2016 4:20 pm
Author: andy c
I got pattern ones from Z Power worked a treat .
Re: carbs
Posted: Fri Aug 19, 2016 5:01 pm
Author: chrisu
andy c wrote:I got pattern ones from Z Power worked a treat .
^^^ This - or has been pointed out any favoured Z part supplier.
Posted: Fri Aug 19, 2016 7:29 pm
Author: z1bman
Posted: Sat Aug 20, 2016 6:01 am
Author: HowieD
Posted: Sat Aug 20, 2016 8:10 am
Author: Mr Bump
You can get pukka brass ones with o rings too. Got to be a better bit of engineering than the std ones.
Can't remember the suppliers name just now - ask and I'll find.
Olly
Posted: Sat Aug 20, 2016 9:04 am
Author: ZedHead
If you cant get them from ZPower or Z1 Enterprizes, I have them in stock
http://www.saisei-europe.com/Shop/Produ ... nnector-z1
Posted: Sat Aug 20, 2016 2:39 pm
Author: KeithZ1R
in the spirit of sharing info
http://www.nrp-carbs.co.uk/
Posted: Sat Aug 20, 2016 9:30 pm
Author: Mr Bump
Nrp carbs - that's the one. Nrp are quite good in my expirience.
Posted: Sat Aug 20, 2016 10:01 pm
Author: z1bman
Posted: Sun Aug 21, 2016 6:43 am
Author: Ginger Bear
I'm sure there might be a member or two willing to make a batch of those.
Posted: Mon Aug 22, 2016 5:54 pm
Author: KWACKERZ1
Thanks All,
Its great to know they are still available. Going to try the Brass ones for longevity.
Posted: Tue Aug 23, 2016 11:24 am
Author: ZedHead
Ginger Bear wrote:I'm sure there might be a member or two willing to make a batch of those.
Volunteering Steve
Posted: Tue Aug 23, 2016 1:53 pm
Author: Ginger Bear
Nope,
Just thought it might be right up Andy Crows or rick Stemps street.
