Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Z1300 cam chain adjuster, ANY help please

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
phil1r
100Club
100Club
Posts: 142
Joined: 6th Aug 2009
Location: Cannock

Z1300 cam chain adjuster, ANY help please

#1 PostAuthor: phil1r » Thu Jun 30, 2016 7:06 pm

Hi Guy's, need to change the adjuster, I have the official workshop manual but this helps me not as I'm fitting the one from a zzr 1100. Need to know procedure for removal of old one and replacement of the new one. Any help please. I have been on some US sites but it's like the blind leading the blind :|
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#2 PostAuthor: z1bman » Thu Jun 30, 2016 7:46 pm

the zzr 1100 tensioner will bolt straight in it is a different profile to the one on your bike but fits perfectly. use a new gasket for the zzr100 though you should remove the cam cover to check the valve timing is correct if its a later zg fuel injection model the have an oil feed pipe attached to the tensioner you will need to remove this & blank of the oil feed out of the back of the cylinder head
Top
phil1r
100Club
100Club
Posts: 142
Joined: 6th Aug 2009
Location: Cannock

#3 PostAuthor: phil1r » Fri Jul 01, 2016 7:56 am

Many thanks
z1bman wrote:the zzr 1100 tensioner will bolt straight in it is a different profile to the one on your bike but fits perfectly. use a new gasket for the zzr100 though you should remove the cam cover to check the valve timing is correct if its a later zg fuel injection model the have an oil feed pipe attached to the tensioner you will need to remove this & blank of the oil feed out of the back of the cylinder head

:) Many thanks z1bman, It's a a2model so none of the oil feed pipe stuff. But when i'm taking the old one out do I have to watch for anything flying off :?:
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#4 PostAuthor: z1bman » Fri Jul 01, 2016 12:33 pm

no just remove the two Allen bolts. leave the 10mm headed bolt in place as this is the locking bolt for the tensioner
Top
phil1r
100Club
100Club
Posts: 142
Joined: 6th Aug 2009
Location: Cannock

#5 PostAuthor: phil1r » Fri Jul 01, 2016 6:35 pm

z1bman wrote:no just remove the two Allen bolts. leave the 10mm headed bolt in place as this is the locking bolt for the tensioner

Many thanks :D
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 17 guests