Z1OwnersClub GB

I am fitting a Rev Limiter to my Harris; it's a nice, simple bit of kit with just 4 x wires..... but I just want some advice to make sure I have it right (before frying me Dyna Coils). I'm running a Dyna S ignition (again, nice & easy).

Here's the wiring instructions:

http://www.powercommander.com/downloads ... DRL200.pdf

The bit thats not 100% clear (to me) is the connection of the BLUE & WHITE wires to the coils..... it doesn't show the feed from the Dyna S, but I assume the coils are kept the same (as without the rev Limiter) and just wired in for the Rev Limiter - added onto the wires? I think the Rev Limiter just shorts (grounds) the coil power input at the selected revs

Looking at the diagram its the coils that cut the revs.Thats how i see it, give it the berries get to the blood line then it cuts the revs.
Ade

need the dyna s diagram

Taffus wrote:need the dyna s diagram

Here you go Taffus lad


http://www.powercommander.com/downloads ... -1_2-2.pdf

give til tomorrow night and i'll draw a cricuit diagram (too many beers at the mo)

You is da man Fanx