Page 1 of 1
gpz1100b/z1100r/z1000j seat size
Posted: Mon Mar 28, 2016 10:40 am
Author: dragon95
Morning ! I think the seat size on those are all the same, Ive got s b2 , but the seat is a bit short, say about 2-3 cm , it slides back wards and forwards, its an aftermarket lawson style that was on the bike when i got it, its overall length is about 69cm, might this be off a 750 or have i got some sort of other issue with the fitting ?
Just waiting for my phone to charge and I'll upload a pic....
cheers
Posted: Mon Mar 28, 2016 11:22 am
Author: paul doran
yes a picture would help
Posted: Mon Mar 28, 2016 11:43 am
Author: Al
My J seat is 69 cm tip to tail.
AL
Posted: Mon Mar 28, 2016 1:46 pm
Author: dragon95
Posted: Mon Mar 28, 2016 1:59 pm
Author: dragon95
Posted: Mon Mar 28, 2016 2:55 pm
Author: Al
This is the seat off my J.
Measures the same as yours from front to back.
AL
Just noticed i have one of my front catches upside down, but which one??????
Posted: Mon Mar 28, 2016 3:16 pm
Author: paul doran
It is obviously too short if it moves back and forth
seat should be a tight fit with no backwards movement at all
Posted: Mon Mar 28, 2016 5:57 pm
Author: sockpuppet
Hi
All my 3 seats b2/ J / and aftermarket all measure the same as yours and your fittings look to be mounted correctly --- do you have a pic of it on the bike ?
regards
Mick
ps
sent you a PM
Posted: Mon Mar 28, 2016 7:55 pm
Author: Taffus
it's missing the springs that pull the rear locks plus you need the helmet lock to fix the rear mountings in place
Posted: Mon Mar 28, 2016 8:06 pm
Author: dragon95
ok, I have the helmet lock on and that works, I havent seen any springs though, anyone have any pics of what it should look like ?
I'll try and get a pic of it on the bike soon, its just all being put back together atm...
Posted: Mon Mar 28, 2016 8:32 pm
Author: dragon95
zorded, the bottom one in the pic is upside down....
