Page 1 of 1
Dyna wiring question
Posted: Sun Mar 27, 2016 8:36 pm
Author: tlc
I now have a spangly new Dyna2000 fitted.
On returning from my inaugural ride I noticed that the off/run switch does not function.
Could this be because the positive lead should be wired through that switch?
Posted: Sun Mar 27, 2016 9:08 pm
Author: Pigford
One thing to bear in mind is a good power supply - and personally I don't have 100% confidence in the "spark" power running up and down the wiring loom - via the kill switch
Unless you've got a new loom or better still a "Wired for George" type conversion.
Posted: Sun Mar 27, 2016 9:22 pm
Author: ZedHead
Pigford wrote:One thing to bear in mind is a good power supply - and personally I don't have 100% confidence in the "spark" power running up and down the wiring loom - via the kill switch
Unless you've got a new loom or better still a "Wired for George" type conversion.
What he said
Posted: Mon Mar 28, 2016 6:00 am
Author: tlc
Thanks Mark.
I'll do a relay mod.