oil seal
Posted: Sun Mar 20, 2016 6:13 pm
Author: paulmceleney
I need to change a oil seal the one behind the front sprocket what is the best way to go about this . do I need to remove the casing, or just the front sprocket ,and do they just push in or do I need to remove the casing a push in from the back
Posted: Sun Mar 20, 2016 6:32 pm
Author: tlc
It is easier to remove the cover but it is possible without.
Posted: Sun Mar 20, 2016 7:29 pm
Author: z1bman
remove the sprocket & the collar behind it then use one of these to pull out the old seal there is also a thin o ring behind the collar i would replace this while you have removed the collar
http://www.ebay.co.uk/itm/Silverline-Sp ... SwYaFWcUhJ
Posted: Mon Mar 21, 2016 6:48 pm
Author: paulmceleney
thanks