Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000 J Frame
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Z1000 J Frame
Could anyone tell me wether the standard J engined frame is the same as the J engined CSR and LTD in the engine part, I realise the back half maybe different.
1981 KZ1000 K1 LTD
Farm Boy with an O Level in Metalwork and not much else.
Everything in Sussex is a She, Except Tom Cat and She`s a He.
Farm Boy with an O Level in Metalwork and not much else.
Everything in Sussex is a She, Except Tom Cat and She`s a He.
-
warren3200gt
- 100Club
- Posts: 390
- Joined: 13th Jun 2014
- Location: Dartford Kent
what I`m getting at is if you made an exhaust pipe using a CSR frame it would fit a LTD and standard bike ie the engine sits the same and the alloy brackets that take the rear foot pegs are in the same position.
Thanks for your help guys.
Thanks for your help guys.
1981 KZ1000 K1 LTD
Farm Boy with an O Level in Metalwork and not much else.
Everything in Sussex is a She, Except Tom Cat and She`s a He.
Farm Boy with an O Level in Metalwork and not much else.
Everything in Sussex is a She, Except Tom Cat and She`s a He.
Who is online
Users browsing this forum: No registered users and 15 guests