Page 1 of 1
Rear wheel offset
Posted: Tue Sep 22, 2015 12:20 pm
Author: GinjaDave
Does any one know the wheel offset, from hub to rim, on a rear spoke wheel, off of a Z1000 A1? I striped it down to put new spokes in and didn't take the measurement first
Posted: Tue Sep 22, 2015 1:22 pm
Author: warren3200gt
Not sure it helps but on a 650 its 12mm from hub edge (drum side) to rim edge.
wheel offset
Posted: Tue Sep 22, 2015 3:31 pm
Author: flateddie
Got my z1000A1 spokes hanging up in the garage waiting to be overhauled have a measure up on Saturday for you.
Posted: Wed Sep 23, 2015 3:36 pm
Author: THEMACCLADS
Sprocket side 28.2mm
Disc side 28.6mm
Hope this helps. Paul
z1000A1 offset
Posted: Fri Sep 25, 2015 8:29 pm
Author: flateddie
Hi There,
Just measured my A1 spoked wheel with the sprocket carrier out mine is 29.5mm from the hub to rim.
good luck
Eddie
Posted: Mon Sep 28, 2015 5:45 pm
Author: GinjaDave
Thank you very much gentlemen that's very helpful.
Regards Dave
Posted: Tue Sep 29, 2015 6:44 am
Author: wayno
Out of curiosity is there an offset on the z900's a4?