Page 1 of 1
Neutral Switch Query
Posted: Tue Jul 28, 2015 4:09 pm
Author: Tonto
Chaps - neutral light failed last week, changed bulb and no joy so took a look at the neutral switch and it was dangling in the breeze.
Problem is I cant seem to re-attach it and nothing in my service maual shows any detail of how it fit into the retainer. Have I lost a compnent that it should locate into ??
Any advice appreciated - Cheers Tim
Posted: Tue Jul 28, 2015 4:16 pm
Author: KeithZ1R
its snapped off, you need to remove the broken threaded bit and replace the whole thing
Posted: Tue Jul 28, 2015 4:20 pm
Author: Z1parR
It's knackered Tim
The switch body has cracked through and the guts have fallen out .
A flat bladed screwdriver will undo the threaded portion of the body from the motor .
A new switch then will sort it
Posted: Tue Jul 28, 2015 4:21 pm
Author: Z1parR
Wot Keith just said
Posted: Tue Jul 28, 2015 6:01 pm
Author: Tonto
Guys thanks, I hadn't realised it had snapped in two
.
I mistakenly thought the yellow hex top screwed into the main body -- doh !
I'll order a replacement from Z-Power tomorrow
Cheers Tim
Posted: Wed Jul 29, 2015 6:06 am
Author: wilsonsjw11
Tim,
The plastic item is now NLA.
You will get a steel item as the replacement part that comes with a push on connector rather than the screw terminal.
Regards
Steve
