Page 1 of 1

who does carb rebuilding ???

Posted: Thu May 21, 2015 2:13 pm
Author: saxon46
anyone know who does carb rebuilding,or anyone who I could send my carbs to,to be checked and rebuilt properly....my zed j is running crap doesn't want to rev.....I borrowed a set of pukka ones and it ran great....I'm not an expert so would prefer to send em to someone who knows what they are doing
I know you gents will know someone any pointers much appreciated :oops: :oops: :oops:

Re: who does carb rebuilding ???

Posted: Thu May 21, 2015 2:28 pm
Author: ADRIAN H
saxon46 wrote:anyone know who does carb rebuilding,or anyone who I could send my carbs to,to be checked and rebuilt properly....my zed j is running crap doesn't want to rev.....I borrowed a set of pukka ones and it ran great....I'm not an expert so would prefer to send em to someone who knows what they are doing
I know you gents will know someone any pointers much appreciated :oops: :oops: :oops:


DogsBolloxofZ1B - did my z1 carbs and I was very impressed with the finished item.

you can email him from link below

http://www.z1ownersclub.co.uk/forum/vie ... ht=#268295

Posted: Thu May 21, 2015 3:13 pm
Author: Al
Whoever you get to do them for you Mark make sure they confirm that the pilot circuits and all internal passageways are clear.
I have previously paid to have mine ultrasonically cleaned and they came back clean. Not working just clean!

AL

Posted: Thu May 21, 2015 6:07 pm
Author: steve bowdler
There is a guy in Swansea , aint used him so do not know how good/bad he is :roll:

http://jrs.uk.com/jrs/JRS_Home.html

Posted: Thu May 21, 2015 6:26 pm
Author: saxon46
al I've had mine ultrasonically cleaned didn't really make much difference really..............you should sell me yours lol

think i need to strip em down and have a look :roll: :roll:

Posted: Thu May 21, 2015 6:34 pm
Author: saxon46
found this on stripping and rebuilding mikunis cv carbs..step by step
http://www.mtsac.edu/~cliff/storage/gs/ ... torial.pdf

Posted: Thu May 21, 2015 8:39 pm
Author: DavidZ1R
I believe Steve Smethurst does them, but not Cheap

Posted: Thu May 21, 2015 9:51 pm
Author: davejames
Not cheap in the slightest, wanted £650 10 years ago. Funnily enough I didn't bother :oops:

Posted: Fri May 22, 2015 11:35 am
Author: Keefleaf
Buzzard does Carb rebuilds :wink:

Posted: Fri May 22, 2015 12:11 pm
Author: z1bman
this company do a decent job of restoring carburettors


http://www.motocarb.com/

Posted: Fri May 22, 2015 9:43 pm
Author: ollie
ask prowlerz1 (martin) on here ,he will do your carbs no problem.Just send him a pm :wink:

Posted: Fri May 22, 2015 11:57 pm
Author: z1bnackerkwacker
steve bowdler wrote:There is a guy in Swansea , aint used him so do not know how good/bad he is :roll:

http://jrs.uk.com/jrs/JRS_Home.html

Me, but I only do my own, too lazy...... :roll:

Posted: Mon May 25, 2015 10:04 pm
Author: Holeshot
Contact Oz at:

http://www.zed-parts.com/zp_mainpage.html

Top fella and absolutely carb-OCD!

Done a few jobs for me and couldn't believe how diligent he is.

:)