Z900 plug caps

[csnurney]

Hi,does anyone know what is the correct plug caps and what angle they should be to fit my z1a.Is it still possible to get them.

Regards Chris.

[london calling]

Is it the original type of plug caps you're after??

[csnurney]

Hi, the original metal caps would be nice.Should these be nippon denso,because someone is selling a set on ebay and i don`t know if these are correct for a z1a.Should the inner cylinders have a straight cap,the outer cylinders have something like a 120degree angle on them.I have 45 degree ngk caps at the moment,just looking for something that looks better.Seen loads of different pictures of z`s and some have red ngk`s,black plugs.The ones on ebay the reserve looks to be over ?100.

Thanks Chris.

Can anyone advise me on the best route togo and where to get some caps from.

[bedlow1]

the metal ones with the grey shanks (pictured) that i am selling on ebay are 100% correct for UK model z1,z1a,z1b.and z900 these are No longer available




The later uk z1000 metal ones had a black shank but were still a simular shape with a larger end rubber, these are still available from kawasaki.

And the the yankee bikes had all black non-metal ones that had the 2 outer ones angled slightly and the inner ones were straight.

beware A lot of the metal ones currently being sold cheap on ebay are intended for snow cats and chain saws!!!!

hope that helps!

[bedlow1]

kl