Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Teething problems

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
Pinhead
Regular Poster
Posts: 93
Joined: 17th Jan 2014

Teething problems

#1 PostAuthor: Pinhead » Tue Mar 10, 2015 6:11 pm

Been out on the z900
Sounds like the chain is rubbing
And put the lights on I think it's a higher voltage
After about 5 mins the fuse poped do I put a lower voltage bulb in
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#2 PostAuthor: PAULJAC47 » Tue Mar 10, 2015 6:16 pm

What fuse popped?lower voltage lamp wont help,what makes you think its the chain?
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo

You can't polish a turd, but you can roll it in glitter

Salad is what real food eats.
Anon

PUM 673
Top
Pinhead
Regular Poster
Posts: 93
Joined: 17th Jan 2014

#3 PostAuthor: Pinhead » Tue Mar 10, 2015 6:27 pm

Just had a look at the fuse
Looks like I put the wrong fuse in should have been the 20amp
I put the 10amp in
The eyes are not as good these day
Building up to having lens replacement
The chain is a 530 I think it was rubbing on one side of the chain guard so I tied it over
Have to have a look under the cover
Top
Pinhead
Regular Poster
Posts: 93
Joined: 17th Jan 2014

#4 PostAuthor: Pinhead » Wed Mar 11, 2015 7:55 pm

Just had the chain guard off and the clutch cover off
I can't see anything wrong
Chain looks like it's in line with the front sprocket
Refitted all the parts back on turning the wheel over by hand
It's not rubbing now i will take it out tomorrow to see if all is working
Could be that I fitted the chain guard wrong
Top
User avatar
floydsz1
Hardcore
Hardcore
Posts: 1476
Joined: 24th Jun 2007
Location: SUNNY MORECAMBE

#5 PostAuthor: floydsz1 » Wed Mar 11, 2015 8:20 pm

the front of the chaingaurd on the inside clips into 2 little brackets on the swingarm. Its very easy to not get it in properly and the gaurd then is to close to the chain
Z1b, z900 A4, zxr750 m2, zrx1200
Z1000 (2003) lawson thingy,
Z1000 (2004) z1b lookalike ,
Z1000j lawson race bike,
Gsxr750H.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 15 guests