I bought a box section swinging arm off e-bay last year, before the building work started here, and somehow or other one of the taper rollers fell out during the build and is probably buried in the hardcore by now. I thought no sweat, there's load of on-line bearing suppliers ... the only problem is the first question from all is 'shaft dia?' = '16mm' = 'sorry no can help'
I have considered buying a 17mm bearing and turning a sleeve for it but a half mm thick sleeve is a tall order to turn in any material. I could do it but it would be very tricky and far from ideal.
The bearing OD appears to be 41mm and width 15mm.
Any one got any bright ideas?
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Taper roller bearing
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
RALPHARAMA
- Area Rep.
- Posts: 3407
- Joined: 19th May 2007
- Location: Pensford, Somerset
- Contact:
Taper roller bearing
Ralph Ferrand
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
Who is online
Users browsing this forum: No registered users and 10 guests