Z1OwnersClub GB

Posted: **Tue Feb 03, 2015 9:53 am**

I've asked this before (quite some time ago) and didn't have any luck,
so here goes again.
Does anyone know of a person/company that can bore/ream out Z1 OEM 1/2" master cylinder to 5/8" so it can be used for twin disc conversion?

I've got a pattern one fitted at present but want to use the OEM M/S.

Cheers

John

Posted: **Tue Feb 03, 2015 11:40 am**

Seem to recollect Al Marshall on here used to do that

Posted: **Tue Feb 03, 2015 6:33 pm**

I can't recall his name but he's in contact with the triples boys.

Something like Klawcuk?

If you're going to get it anodised you should do that first.

Posted: **Tue Feb 03, 2015 8:18 pm**

give past parts a try they re-sleeve brake cylinders and specialise in older bikes.hope this helps.
john

Posted: **Tue Feb 03, 2015 10:24 pm**

I've just remembered it Phil Klawsuk.

Posted: **Wed Feb 04, 2015 9:16 am**

Al Marshall does'nt do them anymore.
Speak to Alan at Muira engineering,Laverda specialist.
If he is still going.
Regards
Steve

Posted: **Wed Feb 04, 2015 4:42 pm**

tlc wrote:I've just remembered it Phil Klawsuk.

Chris thats not a Phil Mcavity type name is it?? :lol:

Z1OwnersClub GB

Rebore 1/2" brake master cylinder

Rebore 1/2" brake master cylinder