Z1OwnersClub GB

Kawasaki's Air Coooled Big Fours
http://rtest.z1ownersclub.co.uk/phpBB3/

Front wheel fit

http://rtest.z1ownersclub.co.uk/phpBB3/viewtopic.php?f=4&t=33941

Page 1 of 1

Front wheel fit

Posted: Mon Jan 26, 2015 7:05 pm
Author: Pinhead
Hi all
I cant find a torque setting for the front axle nut
I tried 60 pounds it lock up the axle
I have looked in the clymer manual and it does not say anything about torquing the axle nuts
All is says for the 900 is to reassemble the hub In the reverse order

Posted: Mon Jan 26, 2015 7:47 pm
Author: z1bman
51-65 ftlbs this is for the 27mm nuts

Posted: Mon Jan 26, 2015 8:20 pm
Author: PAULJAC47
Are you tightening the fork leg bottom clamps first? you should be,something wrong if you are locking the wheel up.Have you got correct spacers in?

Posted: Mon Jan 26, 2015 8:34 pm
Author: Pinhead
Hi again
Just back from the garage it's bloody cold out there
It was me I did not have the speedo in right
It's working now
Thanks
All times are UTC
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/
, Allan Style © http://forum-gta.com/ & http://x-tk.ru/ & http://zumaclub.ru/